Mobility traffic manager
Monitoring the mobility domain
9-20
Client Unicast Tunneling Off: The unicast tunneling path to the indicated device
(either AP or another controller) has been removed. This is normally done only when the
client has disassociated or its home network has changed.
Client Broadcast Tunneling Off: The multicast/broadcast tunneling path to the
indicated device (either AP or another controller) has been removed. This is normally
done only when the client has disassociated or its home network has changed.
Mobile Client Connected from Local Network: The tunneling path for data sent from
the wireless client has been established.
Mobile Client Connected to Home Network: The tunneling path at the client’s home
network egress point has been established.
Mobility Initiated at Home Interface: A request to setup a client connection at its
home network has been received.
Mobile Terminated at Home Interface: A client connection at its home network has
been terminated. This normally happens only when the client has disconnected or the
network path to its connection point has been disrupted.
Mobility Initiated at Client Interface: A request to setup a client connection at its
connection point (the AP where the client is associated) has been received.
Mobility Terminated at Client Interface: A client connection at its connection point
has been terminated. This normally happens only when the client has disconnected or the
network path to its home network has been disrupted.
Client roamed to another BSSID: A client for which a tunneling path has been
established has roamed to another AP. In this case, the tunneling path from its previous
AP to its home network is disconnected, and a tunneling path from its new AP to its home
network is established.
Client updated VSC/VLAN/Network: A client for which a tunneling path has been
established has re-connected to a network and as a result has a new home network
assignment. In this case, the tunneling path to its previous home network is
disconnected, and a tunneling path to its new home network is established.
No AP available to terminate client traffic: A home network terminated by an AP is
not currently available to egress the client traffic. In this case, data from the client will be
blocked until the home network (i.e., the AP) becomes available.
To Next Page
Loading...
Need help?
General
