HP MSM7XX

Mobility traffic manager
Scenario 1: Centralizing traffic on a controller
9-22
VSC configuration
Enable MTM support on the VSC.
1. Select Controller > VSCs > HP.
 Under Global, clear Access control.
(For complete screenshot see VSC configuration options on page 5-5.)
 Select Wireless mobility, then under it:
 Select Mobility traffic manager.
 Select Block user.
(For complete screenshot see VSC configuration options on page 5-5.)
2. Either disable Wireless security filters or set it to Custom.
3. Select Save.
Network profiles
This scenario uses the default network profiles, so no configuration is necessary.