Mobility traffic manager
Scenario 2: Centralized traffic on a controller with VLAN egress
9-26
4. Select VLAN, and under it, set ID to 40.
5. Select Save.
Create the VLAN
Create a VLAN on the Internet port using the network profile you just defined.
1. Select Controller > Network > Ports. Initially, the VLAN configuration list will be
empty.
2. Select Add New VLAN.
Under General, set Port to Internet port.
Under VLAN, set VLAN ID to 40 (All-Traffic).
Under Assign IP address via, let the setting None. An address is not needed.
3. Select Save.
To Next Page
Loading...
