HP MSM7XX

Mobility traffic manager
Scenario 6: Distributing traffic using VLAN ranges
9-54
Controller 1 configuration
Mobility domain
1. Select Controller >> Management > Device discovery.
 Select Mobility controller discovery.
 Select This is the primary mobility controller.
(For complete screenshot see Defining the mobility domain on page 9-9.)
2. Select Save.
VSC
1. Select Controller >> VSCs > HP.
Under Global
 Clear Access control.
(For complete screenshot see VSC configuration options on page 5-5.)
 Select Wireless mobility, then under it:
 Select Mobility traffic manager.
 Select Block user.
(For complete screenshot see VSC configuration options on page 5-5.)
2. Either disable Wireless security filters or set it to Custom.
3. Select Save.