HP MSM7XX User Manual

User authentication, accounts, and addressing
Introduction
10-4
* Wired users are only supported on the default VSC, unless their traffic is on a VLAN that
matches the VSC ingress defined on another VSC. (On a controller team, wired users are
only supported via the MSM317 switch ports.)
MAC-based
(VSC)
Wireless users
authenticated via:
 Local user accounts
 External RADIUS
server
 Active Directory
Wireless users
authenticated via:
 Local user accounts
 External RADIUS
server
 Active Directory
Wireless + wired users
authenticated via:
 External RADIUS
server
Configuring MAC-
based
authentication on a
VSC on page 10-17.
MAC-based
(Switch port)
Only supported when the switch port is not bound to a VSC. Supports
wired users only.
Configuring MAC-
based
authentication on
an MSM317 switch
port on page 10-19.
HTML-based Not supported Wireless users
authenticated via:
 Local user accounts
on the controller
 External RADIUS
server
 Active Directory
Not supported Configuring HTML-
based
authentication on a
VSC on page 10-22.
VPN-based Not supported Wireless + wired* users
authenticated via:
 Local user accounts
on the controller
 External RADIUS
server
 Active Directory
Not supported Configuring global
MAC-based
authentication on
page 10-16.
No
authentication
Wireless + wired users* No authentication
on page 10-26.
Auth type
The Use controller for option is set to:
For more
information,
see ...
Authentication
Authentication and
Access control
Neither

HP MSM7XX Specifications

General

Brand	HP
Model	MSM7XX
Category	Controller
Language	English