User authentication, accounts, and addressing
Locally-defined user accounts
10-28
Example
This example illustrates how to indirectly customize the Default AC profile by defining
several attributes, and shows how these settings are then reflected in a the Default AC profile
and the user account.
The following sample page shows several attributes defined on the Public access >
Attributes page under Configured attributes. The two of interest for this example are
highlighted below.
default-user-max-output-rate Default user data rates on page 15-53.
default-user-bandwidth-level Default user bandwidth level on page 15-51.
default-user-use-public-ip-subnet Default user bandwidth level on page 15-51
Attribute For more info see
To Next Page
Loading...
Need help?
General
