Authentication services
Using a third-party RADIUS server
11-7
2. Select Add New Profile. The Add/Edit RADIUS Profile page opens.
3. Configure the profile settings as described in the following section.
4. Select Save.
Configuration parameters
Profile name
Specify a name to identify the profile.
Settings
Authentication port: Specify a port on the RADIUS server to use for authentication.
By default RADIUS servers use port 1812.
Accounting port: Specify a port on the RADIUS server to use for accounting. By
default RADIUS servers use port 1813.
Retry interval: Specify the number of seconds that the controller waits before
access and accounting requests time out. If the controller does not receive a reply
within this interval, the controller switches between the primary and secondary
To Next Page
Loading...
Need help?
General
