Working with RADIUS attributes
User attributes
15-26
Reply-Message
(string)
This string (as defined in RFC 2865) is recorded and passed as is to the
GetRadiusReplyMessage() asp function. Multiple string are supported to a maximum length
of 252 bytes.
Access challenge
EAP-Message
(string)
One or more occurrences of this attribute is supported inside the same packet. All
occurrences are concatenated and transmitted to the IEEE802dot1x client as is. As defined in
RFC 2869.
State
(string)
As defined in RFC 2865.
Accounting request
Accounting start, stop. and interim-update
Acct-Authentic
(32-bit unsigned integer)
Always set to 1 which means RADIUS.
Acct-Delay-Time
(32-bit unsigned integer)
As defined in RFC 2869.
Acct-Event-Timestamp
(32-bit unsigned integer)
As defined in RFC 2869.
Acct-Session-Id
(32-bit unsigned integer)
Random value generated by the controller.
Acct-Status-Type
(32-bit unsigned integer)
Supported value are: Start (1), Interim Update (3), and Stop (2).
Calling-Station-Id
(string)
The MAC address of the user’s computer in IEEE format. For example: 00-02-03-5E-32-1A.
Called-Station-Id
(string)
The MAC address of the controller LAN port in IEEE format. For example: 00-02-03-5E-32-1A.
To Next Page
Loading...
Need help?
General
