Working with RADIUS attributes
User attributes
15-28
Logoff-url
The WISPr log-off URL that will be used.
SMI network management private enterprise code = 14122
Vendor-specific attribute type number = 3
Attribute type: A string in the format: wispr-logoff-url=URL
Accounting stop. and interim-update
Acct-Session-Time
(32-bit unsigned integer)
Number of seconds this session since this session was authenticated. Only present when
Acct-Status-Type is Interim-Update or Stop.
Acct-Input-Gigawords
(32-bit unsigned integer)
High 32-bit value of the number of octets/bytes received by the user. Only present when Acct-
Status-Type is Interim-Update or Stop.
Acct-Input-Octets
(32-bit unsigned integer)
Low 32-bit value of the number of octets/bytes received by the user. Only present when Acct-
Status-Type is Interim-Update or Stop.
Acct-Input-Packets
(32-bit unsigned integer)
Low 32-bit value of the number of packets/bytes received by the user. Only present when
Acct-Status-Type is Interim-Update or Stop.
Acct-Output-Gigawords
(32-bit unsigned integer)
High 32-bit value of the number of octets/bytes sent by the user. Only present when Acct-
Status-Type is Interim-Update or Stop. As defined in 2869.
Acct-Output-Octets
(32-bit unsigned integer)
Low 32-bit value of the number of octets/bytes sent by the user. Only present when Acct-
Status-Type is Interim-Update or Stop.
Acct-Output-Packets
(32-bit unsigned integer)
Low 32-bit value of the number of packets/bytes sent by the user. Only present when Acct-
Status-Type is Interim-Update or Stop.
To Next Page
Loading...
Need help?
General
