Working with RADIUS attributes
Colubris AV-Pair - User attribute values
15-73
Syntax
welcome-url=URL_of_page[placeholder]
goodbye-url=URL_of_page[placeholder]
Where:
Placeholders
By appending the following optional placeholders, you can pass important information to the
Web server about the user. Server-side code can process this information to generate custom
pages on-the-fly.
Parameter Description
URL_of_page
Specify the URL of a Web page on an external Web server.
placeholder
Placeholder as defined in the following table.
Placeholder Description
%l
Returns the URL on the controller where user login information
should be posted for authentication. This option is used with the
remote login page feature. By default, this value is URL encoded. (To
enable/disable URL encoding, set the value of url-encode in the
<ACCESS-CONTROLLER> section in the configuration file.)
%n
Returns the NAS ID assigned to the controller. By default, this is the
unit serial number. Not supported in local mode.
%s
Returns the RADIUS login name assigned to the controller. By
default, this is the unit serial number.
%u
Returns the login name of the user.
%o
Returns the original URL requested by the user. By default, this value
is URL encoded. (To enable/disable URL encoding, set the value of
url-encode in the <ACCESS-CONTROLLER> section in the
configuration file.)
%i
Returns the domain name assigned to the controller Internet port.
%p
Returns the IP port number on the controller where user login
information should be posted for authentication.
%a
Returns the IP address of the controller Internet port.
%E
When the location-aware feature is enabled, returns the ESSID of the
wireless AP with which the user is associated.
%P
When the location-aware feature is enabled, returns the wireless
mode the user is using to communicate with the AP.
%G
When the location-aware feature is enabled, returns the group name
of the wireless AP with which the user is associated.
To Next Page
Loading...
Need help?
General
