Network configuration
IP QoS
3-36
5. Under Priority, from the drop-down list select Very High.
6. Select Save.
Note You could also create another profile using the same parameters but for UDP to cope
with any kind of SIP traffic.
7. On the IP QoS Profile page select Add New Profile.
8. Under Profile name, specify Web.
9. Under Protocol, from the drop-down list select TCP.
10. Under Start port, from the drop-down list select http. Start port and End port are
automatically populated with the common HTTP port, 80.
11. Under Priority, from the drop-down list select Low.
12. Select Save.
To Next Page
Loading...
