Chapter 2
|
Using the Web Interface
Navigating the Web Browser Interface
Table 4: Switch Main Menu (Continued)
port is added to the Voice VLAN, filtering of non-VoIP packets, the
purposes
Shows the rules used to enforce bandwidth policing for a policy map
Applies a policy map to an ingress port
Configures auto-detection of VoIP traffic, sets the Voice VLAN, and VLAN
Maps the OUI in the source MAC address of ingress packets to the VoIP
Shows the OUI telephony list
Configures VoIP traffic settings for ports, including the way in which a
method of detecting VoIP traffic, and the priority assigned to the voice
Authentication, Authorization and Accounting
Configures authentication sequence – local, RADIUS, and TACACS
Configures RADIUS and TACACS server message exchange settings
Specifies a group of authentication servers and sets the priority
Shows the authentication server groups and priority sequence
Enables accounting of requested services for billing or security
Specifies the interval at which the local accounting service updates
information to the accounting server
Configures accounting for various service types
Shows the accounting settings used for various service types
Sets the accounting method applied to specific interfaces for 802.1X,
CLI command privilege levels for the console port, and for Telnet
Shows the configured accounting methods, and the methods applied
Shows basic accounting information recorded for user sessions
Enables authorization of requested services
Configures authorization for various service types
Shows the authorization settings used for various service types
To Next Page
Loading...
