Chapter 2
|
Using the Web Interface
Navigating the Web Browser Interface
Table 4: Switch Main Menu (Continued)
Traffic
that will use a weighted or hybrid mode
priority processing
processing
the action to take for conforming and non-conforming traffic
Multiple Spanning Tree Algorithm
Configures initial VLAN and priority for an MST instance
Configures the priority or an MST instance
Configures global settings for an MST instance
Adds VLAN members for an MST instance
Adds or deletes VLAN members for an MST instance
Displays MSTP values used for the bridge
Configures interface settings for an MST instance
Displays interface settings for an MST instance
Sets the input and output rate limits for a port
Sets the broadcast storm threshold for each interface
Sets the default priority for each port or trunk
Sets queue mode for the switch; sets the service weight for each queue
Selects DSCP or CoS priority processing
Maps CoS/CFI values in incoming packets to per-hop behavior for
Maps DSCP values in incoming packets to per-hop behavior for priority
Creates a class map for a type of traffic
Shows configured class maps
Modifies the name of a class map
Configures the criteria used to classify ingress traffic
Shows the traffic classification rules for a class map
Creates a policy map to apply to multiple interfaces
Shows configured policy maps
Modifies the name of a policy map
Sets the boundary parameters used for monitoring inbound traffic, and
To Next Page
Loading...
