Chapter 2
|
Using the Web Interface
Navigating the Web Browser Interface
Table 4: Switch Main Menu (Continued)
components, and sets the log rate for packet inspection
sets the LLDP attributes to advertise
switch
switch
Enables inspection globally, configures validation of additional address
Enables ARP inspection on specified VLANs
Sets the trust mode for ports, and sets the rate
limit for packet inspection
Displays statistics on the inspection process
Shows the inspection log list
Stores error messages in local memory
Shows logged error messages
Configures the logging of messages to a remote logging process
Sends an SMTP client message to a participating server
Configures global LLDP timing parameters
Sets the message transmission mode; enables SNMP notification; and
Specifies the physical location of the device attached to an interface
Show Local Device Information
Displays general information about the local device
Displays information about each interface
Show Remote Device Information
Displays information about a remote device connected to a port on this
Displays detailed information about a remote device connected to this
Displays statistics for all connected remote devices
Displays statistics for remote devices on a selected port or trunk
Simple Network Management Protocol
Enables SNMP agent status, and sets related trap functions
To Next Page
Loading...
