Chapter 2
|
Using the Web Interface
Navigating the Web Browser Interface
Table 4: Switch Main Menu (Continued)
need for a dedicated server
snooping
multicast router
through static or dynamic configuration
data packets
data packets
Configures static entries for domain name to address mapping
Shows the list of static mapping entries
Modifies the static address mapped to the selected host name
Displays cache entries discovered by designated name servers
Configures multicast DNS lookup on the local network without the
Dynamic Host Configuration Protocol
Specifies the DHCP client identifier for an interface
Specifies DHCP relay servers
Enables dynamic provisioning via DHCP
Enables multicast filtering; configures parameters for multicast
Add Static Multicast Router
Assigns ports that are attached to a neighboring multicast router
Show Static Multicast Router
Displays ports statically configured as attached to a neighboring
Show Current Multicast Router
Displays ports attached to a neighboring multicast router, either
Statically assigns multicast addresses to the selected VLAN
Shows multicast addresses statically configured on the selected VLAN
Configures IGMP snooping per VLAN interface
Shows IGMP snooping settings per VLAN interface
Configures the interface to drop IGMP query packets or all multicast
Configures the interface to drop IGMP query packets or all multicast
Displays the current multicast groups learned through IGMP Snooping
Enables IGMP filtering for the switch
Adds IGMP filter profile; and sets access mode
Shows configured IGMP filter profiles