120 Matrix ETERNITY NE System Manual
• Number Based: Choose this option if the service providers of the trunks you selected offers different
tariffs according to area or distance, or phone numbers dialed.
• Time Based: Choose this option if the service providers of the selected trunks offer a different tariff
according to the time of the day.
• Time + Number Based: Choose option if the service providers of the selected trunks offer different
tariffs according to the time of the day as well as area/distance.
• Service Provider Based: Choose this option if the same service providers of the selected trunks offer
different rates for calls made to numbers within their own network and for calls made to numbers of
another Service Provider's network.
If you do not want to apply LCR, select OFF. The Settings icon does not appear if the LCR is OFF.
Configure LCR method that you selected for the trunk group.
• To configure Least Cost Routing method you selected, click the Settings icon. A new window opens.
• Configure the LCR method. See “Least Cost Routing (LCR)” under Advanced Settings for instructions.
• Click Submit. The window closes.
• Select Trunks allowed for dialing ‘5’. The outgoing call will be routed through the selected trunks when
the extension user dials TAC ‘5’. Follow the same steps as described above.
• Double-click the field. A multiple selection box opens.
• Select trunks, placing your cursor on the desired trunk, and clicking Select>>.
• Change the sequence of the trunks you selected, if required, using the Up and Down arrow buttons on
the right display box. Delete trunks from the ones you have selected, if required.
• Enable Rotation, if you have selected more than one trunk. Default: Disabled.
• Click OK.
All the trunks appear in Trunks allowed for dialing ‘5’, in the sequence you selected, separated by
commas.
• Choose a Least Cost Routing method, if you want to apply it on the trunks. Default: OFF.
• Configure the Least Cost Routing method, by clicking Settings icon.
Similarly, you will be able to select outgoing trunks for Trunk Access Codes 3, 4, 5 and 6, if you have
assigned access codes to them in “Extension and Feature Codes”.
• Click Submit.
To Next Page
Loading...
