Matrix ETERNITY NE System Manual 305
Call Budget
• To enable call budget on the mobile trunk, set Use Call Budget? to Yes. Default: No.
• Define the call budget in terms of number of calls in the Restrict outgoing calls if total number of
calls exceeds. Default: 9999.
• Define the call budget in terms of amount in the Restrict outgoing calls if total cost of the calls
exceeds. Default: 999999 (local currency).
• Define the call budget in terms of duration in the Restrict outgoing calls if total call duration
exceeds. Default: 999999 minutes
• To have the system reset the Number of Calls/Amount/Minutes automatically on a particular date,
select the desired date from the Reset Call Budget on combo box as 1st to 31st of the every month.
The consumed Call Budget Amount/Minutes/Number of Calls can be reset from SE and SA Mode, referred
to as Manual Reset. Refer the feature description “Call Budget on Trunk”.
Call Back
• Click Call Back to enable the ‘Call Back on Trunk Port’ feature on the mobile trunk. See “Call Back on
Trunk Ports” to know more about this feature.
• Select a Call Back Profile, 1 to 4, for the trunk port from the combo box.
Make sure you also configure the Call Back profile you select here.
To configure the profile, click the Settings icon. This icon does not appear when Call Back is OFF.
• A new window opens.
• Configure the Profile Number. See “Call Back on Trunk Ports” for instructions.
• Click Submit to save your profile.
• Close the window.
To Next Page
Loading...
