332 Matrix ETERNITY NE System Manual
• Click the Settings icon. A new window opens.
To configure the CLI Based Routing Table parameters, see “CLI Based Routing”.
• To enable “Direct Inward System Access (DISA)” on the SIP Trunk, select the desired Direct Inward
System Access option. Default: Disabled.
• PIN Authentication–Multiple calls: Select this option if you want to enable DISA with PIN
Authentication and allow multiple calls during the DISA login session.
• CLI Authentication–Multiple calls: Select this option if you want to enable DISA login with CLI
Authentication and allow multiple calls to be made during the DISA login session.
• CLI Authentication–One call: Select this option if you want to enable DISA session with CLI
Authentication, and allow only a single call to be made during the DISA login session.
If you select CLI Authentication Multiple Calls or CLI Authentication One Call as CLI Authentication, you
must configure the DISA CLI Authentication Table under Advanced Settings. See “Direct Inward System
Access (DISA)”.
• To enable “Trunk Auto Answer”
75
on the trunk, select the type of Trunk Auto Answer you want:
• For all Calls: the system will answer all incoming calls landing on the trunk line.
• When Busy: the system will answer incoming calls on the trunk, if the landing destination is busy.
75. Trunk Auto Answer enables calls landing on a trunk to be answered automatically by greeting the caller with a voice message
before the call is actually handled.
To Next Page
Loading...
