Matrix ETERNITY NE System Manual 359
Default: OFF.
• You can configure the Call Taping Profile number you selected for the extension. To do this,
• Click the Settings icon. The page opens in a new window, displaying the parameters of the profile you
selected for the extension. This icon does not appear when Call Taping is OFF.
• In the new window,
• Select the Tape Internal Calls check box, if you want internal calls made and received by the
extension to be taped.
• Select the Tape Incoming Calls received without CLI check box if you want incoming calls
without CLI to be taped. Default: Disabled.
•In Tape Incoming Calls received from following numbers, type the numbers of the Incoming
Calls that must be taped. You may type as many as 99 numbers.
•In Tape Outgoing Calls made to following numbers, type the external numbers that you want the
system to tape. You may type as many as 99 numbers.
• Click Submit to save the Profile.
See “Call Taping” to know more.
Call Duration Control
If you have set the SIP Trunk Mode to Peer-to-Peer and Treat incoming call as Station, you may also enable Call
Duration Control.
• Click Call Duration Control to expand options.
• Select the type of Call Duration Control to be applied from the options:
•OFF
• Apply as per profile 1
• Apply as per profile 2
• Apply as per profile 3
• Apply as per profile 4
If you do not want to apply Call Duration Control, select OFF. Default: OFF.
• You can configure the Call Duration Control Profile number you selected for the extension. To do this,
• Click the Settings icon. The page opens in a new window. The page displays the parameters of the
profile you selected for the extension. This icon does not appear when Call Duration Control is OFF.
• In the new window,
• Enable Apply CDC to Internal Calls, if CDC is to be applied on internal calls. Default: Disabled.
• Enable Apply CDC for Incoming Calls received from trunk, if CDC is to be applied on incoming
external calls. Default: Disabled.
To Next Page
Loading...
