396 Matrix ETERNITY NE System Manual
USB 80% is consumed
[VMS] Warning! VMS USB memory
usage is 80% consumed
This email will be sent to the SE, when 80%
of the USB memory has been consumed.
USB 100% is consumed
[VMS] Alert! VMS USB memory usage is
completely consumed
This email will be sent to the SE, when 100%
of the USB memory has been consumed.
USB consumption is
below 75%
[VMS] VMS USB memory usage is in
limit
This email will be sent to SE, when USB
memory consumption is below 70%.
Mailbox consumption alert to SE
Mailbox of user is 80%
consumed
[VMS] Warning! Mailbox <ext> is 80%
consumed
This email will be sent to the SE, when 80%
of the mailbox memory has been consumed,
along with the Extension Number (if
configured).
Mailbox of user is 100%
consumed
[VMS] Alert! Mailbox <ext> is completely
consumed
This email will be sent to the SE, when 100%
of the mailbox memory has been consumed,
along with the Extension Number (if
configured).
Mailbox consumption alert to User
Mailbox is 80%
consumed
[VMS] Warning! Mailbox <ext> is 80%
consumed
This email will be sent to the User, when 80%
of the personal mailbox memory has been
consumed, along with the Extension Number
(if configured).
Mailbox is 100%
consumed
[VMS] Alert! Mailbox <ext> is completely
consumed, please delete old messages
to allow storing of new messages
This email will be sent to the User, when
100% of the personal mailbox memory has
been consumed, along with the Extension
Number (if configured).
General Mailbox is 80%
consumed
[VMS] Warning! General Mailbox <ext>
is 80% consumed
This email will be sent to the User, when 80%
of the general mailbox memory has been
consumed, along with the Extension Number
(if configured).
General Mailbox is 100%
consumed
[VMS] Alert! General Mailbox <ext> is
completely consumed, please delete old
messages to allow storing of new
messages
This email will be sent to the User, when
100% of the general mailbox memory has
been consumed, along with the Extension
Number (if configured).
Notification for New Message in Mailbox
Normal Message
[VMS] <msg_type> Message received
from <cli>
This email will be sent to user’s personal
mailbox, when a message is received along
with the Message Type and the Caller
Number
a
.
Conversation Recording
Message
[VMS] Message received for
conversation with <num1>
This email will be sent to user’s personal
mailbox, when the conversation between the
extension user and the caller was recorded.
Call Tapping Message
[VMS] Message received for call
recording between <num1> and
<num2>
This email will be sent to user’s personal
mailbox, when the conversation between two
Numbers was recorded.
Notification for New Message in General Mailbox
Event Message Description
To Next Page
Loading...
