Matrix ETERNITY NE System Manual 405
If you want voice message to be played as message wait notification, record and assign a Voice
Module. Refer “Voice Message Applications” for instructions.
SARVAM UCS can play only 4 Voice Modules simultaneously. The Voice Module for Message Wait
Notification will not be played if there are already 9 being played simultaneously. In this case, Stuttered Dial
Tone will be played as Message Wait Indication, when the extension user goes OFF-Hook.
• Ring: The extension will ring for the duration of the Message Wait Ring Timer (configurable; default: 30
seconds), for as many times as the Message Wait Ring Count (configurable; default: 10 times), at the
interval set as the Message Wait Ring Timer Interval (configurable; default: 30 minutes).
When the extension user answers the call, the VMS informs the user of the new message and allows
the extension user to access it.
• Stuttered Dial Tone + LED Lamp (High Voltage): When the extension user goes OFF-Hook, the
extension user will hear a stuttered dial tone and if the SLT has a 'Message Wait' lamp, the lamp will
blink continuously using High Voltage. When the extension user retrieves all the waiting messages, the
LED will be turned off and the stuttered dial tone will stop.
• Stuttered Dial Tone + LED Lamp (Polarity Reversal): When the extension user goes OFF-Hook, the
extension user will hear a stuttered dial tone and if the SLT has a 'Message Wait' lamp, the lamp will
blink continuously using Polarity Reversal. When the extension user retrieves all the waiting messages,
the LED will be turned off and the stuttered dial tone will stop.
• LED Lamp (High Voltage): If the SLT has a 'Message Wait' lamp, it will blink continuously using High
Voltage. When the extension user retrieves all the waiting messages, the LED will be turned off.
• LED Lamp (Polarity Reversal): If the SLT has a 'Message Wait' lamp, it will blink continuously using
Polarity Reversal. When the extension user retrieves all the waiting messages, the LED will be turned
off.
Default: Stuttered Dial Tone + LED Lamp (High Voltage).
Refer the feature description “Message Wait” to know more.
Message Wait Notification via Call
89
The message wait notification will be sent to a number(destination number). This number can be an internal or an
external number.
•In Type, you may select — Immediate, Scheduled or None.
• Select Immediate, if you want the notifications to be sent as soon as a new message arrives in the
mailbox of the extension user.
• Select Scheduled, if you want the notification to be sent at fixed time schedules.
• Select None, if you do not want to set message wait notification via call.
Default: None.
89. Applicable only when you select Extension as the “Select Number” option.
To Next Page
Loading...
