426 Matrix ETERNITY NE System Manual
• If you select Transfer to Department Group or Transfer to Extension, select the respective
Department Group number or enter the desired extension number.
•In Call Transfer Profile, select the desired Call Transfer Profile as per your requirement. By
default, As configured for Transfer Number is selected.
Click Settings to configure the parameters of the selected profile. For more information, see
“Call Transfer Profile”.
• If you select Go to VMAA Menu, select the desired VMAA Menu.
• If you select Disconnect, the system will disconnect the call.
• Click Close to close the window.
Mailbox Access
Settings
•In Mailbox Access Prompt, select the prompt you wish to play when the caller has selected Personal
Mailbox Access as the Action on Digit Dialed option.
Select None, if you do not wish to play any prompt.
• Click Settings . The Prompts Management page opens.
You may add a new prompt from here. For further details, see “Prompts Management”.
Once the files are uploaded these appear as options for Mailbox Access Prompt.
No Match Found Settings
• For details, refer “No Match Found Settings”.
No Digit Dialed Settings
• For details, refer “No Digit Dialed Settings”.
• Click Close to close the window.
To Next Page
Loading...
