EasyManua.ls Logo

Matrix Telecom ETERNITY NE - Page 475

Matrix Telecom ETERNITY NE
1370 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Matrix ETERNITY NE System Manual 465
Click Settings to configure the parameters of the selected profile.
If you select Go to VMAA Menu, select the desired VMAA Menu.
If you select Disconnect, the system will disconnect the call.
No Digit Dialed Settings
No Digit Dialed Settings are applicable when caller has not dialed the extension number and the first digit wait timer
has expired.
•In No Digit Dialed Prompt, select the prompt which you wish to play when caller has not dialed any digit.
Select None, if you do not wish to play any prompt.
Click Settings . The Prompts Management page opens.
You may add a new prompt from here. For further details, see “Prompts Management”.
Once the files are uploaded these appear as options for No Digit Dialed Prompt.
Select the No Digit Dialed Retry check box to prompts the caller to dial the Extension Number again.
•In No Digit Dialed Retry Count, select the number of times you wish to prompt the caller for dialing the
extension number. The prompt will be played repeatedly till the Retry Count expires.
•In Retry Count Expiry Prompt, select the prompt you wish to play when the Retry Count expires.
Select None, if you do not wish to play any prompt.
Click Settings . The Prompts Management page opens.
You may add a new prompt from here. For further details, see “Prompts Management”.
Once the files are uploaded these appear as options for Retry Count Expiry Prompt.
•In No Digit Dialed Action, you can select — Disconnect, Transfer to Operator, Transfer to Extension,
Transfer to Department Group, Go to VMAA Menu.
If you select Transfer to Department Group or Transfer to Extension, select the respective
Department Group number or enter the desired extension number.
•In Call Transfer Profile, select the desired Call Transfer Profile as per your requirement. By
default, As configured for Transfer Number is selected.
Click Settings to configure the parameters of the selected profile.
If you select Go to VMAA Menu, select the desired VMAA Menu.
If you select Disconnect, the system will disconnect the call.

Table of Contents