Matrix Telecom ETERNITY NE - Page 61

Matrix ETERNITY NE System Manual 51
• The LCD display will light up and the booting message appears.
• Then the ‘Loading...’ message appears on the phone display.
• The phone will start loading the Extended IP Phone Firmware.
It will display current firmware being loaded.
• After loading the firmware, the phone will prompt you to change Network settings.
• Wait for a few seconds.
If you want to change the Network Settings, press the Enter key. Detailed instructions for changing the
Network Settings of the phone are provided at the end of this topic. See “Network Settings” at the end of
this topic.
• The phone makes DHCP Discovery and fetches its IP Address and Server Address from the DHCP
Server.
On getting the IP Address and Server Address, the phone initiates Auto Configuration to download the
configuration files from ETERNITY NENX.
• As the phone downloads the configuration files, the file names will appear one by one.
• On successful download of all configuration files, the phone attempts to register with ETERNITY NENX.
• On successful registration, the phone will display the current day, date and time, the extension number and
name assigned to the Extended IP Phone.
Network Settings
You can change the network settings of the Extended IP Phone. Press the Down key when the phone is in idle
state. To move the cursor and scroll through the menu and submenu options, use the following navigation keys on
your phone.
• The Enter key to make a selection or to complete an action.
• The Up key to move up the Menu.
• The Down key move down the Menu.
• The Forward key move the cursor one character.
• The Back key to move the cursor one character and to return from the submenu to the main menu.
• The Cancel key to exit a menu.