76 Matrix ETERNITY NE System Manual
• Connect the LAN Port of SPARSH VP330 to the IP Network — Router or LAN Switch — using the Ethernet
Cable.
OR
Connect the Wi-Fi USB Adapter into the USB port of the phone.
You can purchase the Wi-Fi USB Adapter from Matrix as an optional peripheral device to support wireless
network.
• To connect your phone to a computer on your desk, use an Ethernet cable (not supplied with this phone) to
connect the PC Port at the bottom of the phone to the LAN Port of the computer.
• It is a PoE enabled phone and can be powered over Ethernet by connecting it to a PoE enabled LAN
Switch (IEEE 802.3af Compliant). In this case you need not connect the Power Adapter.
If you do not want to use PoE, plug in the connector of the Adapter into the power jack (DC Jack) with the
label 5VDC-2A at the bottom of the phone. Plug in the Power Adapter into a power outlet.
• If both the power options, that is, PoE as well as Power Adapter are available to the phone, then the
phone will derive power from the PoE enabled LAN Switch.
• The IP phone should be used with Matrix original power adapter (5V/2A) only. The use of any third-
party power adapter may cause damage to the phone.
• Switch ON power supply.
When you power the phone, the boot process will be initiated in the following sequence.
• All keys with LED, including the Speaker key, and the Ringer LED, will glow.
• The LCD display will light up and booting message appears.
• The loading message appears on the phone display, while loading the application.
• The phone makes DHCP Discovery and fetches its IP Address and Server Address from the DHCP
Server.
If you want to change the Network Settings/Server Settings or want to use WiFi for connectivity, press
Settings .
Refer to the SPARSH VP330 User Guide,
• To change the Network Settings of the phone and configure the network parameters.
• To use WiFi for connectivity and configure its parameters.
• On getting the IP Address and Server Address, the phone initiates Auto Configuration to download the
configuration files from ETERNITY NENX.
• On successful download of all configuration files, the phone attempts to register with ETERNITY NENX.
To Next Page
Loading...
