Parameter Description
System Logger Enable system logger servcie
VNC Service Enable VNC service
l Port
l Multiple clients
l View only
l Encryption
l Authentication
Management
Management is available only when logged as admin.
From the management area is possible "Update System Components" below of the HMI device.
CAUTION: Working in the Management area is a critical operation and, when not performed correctly,
may cause product damages requiring service of the product. Contact technical support for
assistance.
Use the “Clear” command inside the “Data” section to remove HMI Runtime from the device (Factory Restore)
Display
Parameter Description
Brightness Brightness level of the display
Back light timeout Backlight inactivity timeout
Orientation Display orientation
Restart
HMI device restart command
Authentication
Enter in edit mode to change the authentication passwords.
EXIT
Exit from the System Setting tool.
Update System Components
CAUTION: Working in the Management area is a critical operation and, when not performed correctly,
may cause product damages requiring service of the product. Contact technical support for
assistance.
The system components of the Linux device can update locally using an USB memory key or remotely via web browser.
HMWIN Studio |User Manual| v206 (2017-06-30) | EN| © 2014-2017 Panasonic Electric Works Europe AG
395
37 System Settings
To Next Page
Loading...
