Software Reference 221
V4.2 LabChip GX User Manual PerkinElmer
Export Window (Continued)
Gel
If selected, the gels selected in the Gel View are exported to the
specified folder in the selected image format. Click the Browse (...)
button to specify the desired path for the image file. The file names
are <plate name>_Gel_<well number>. The following options are
available on the Export window.
• Entire Collection: If selected, a gel is exported for each well in
the collection. (Not available on the Auto Export window.)
• Selected Wells: If selected, a gel is exported for each of the
wells selected in the Gel View or Plate View or Plate List. (Not
available on the Auto Export window.)
• Single File: If selected, the selected gels are all included in the
same image file.
• Separate Files: If selected, the selected gels are each exported
to a separate image file.
• Contrast Lane: Specifies the gel lane to use to set the minimum
and maximum RFU values for all lanes in the collection or
selected wells before exporting the gels. All exported gels are
set to the minimum and maximum RFU values in the selected
lane. The contrast lane option only displays in the Auto Export
window after the sample wells have been selected. (Not
available on the Auto Export window.)
• Height: Specifies the desired height, in pixels, of the gel
graphic.
Image Format for Gel and Electropherogram
Select the desired format for the exported image files.
To Next Page
Loading...
Need help?
General
