Raisecom iTN2100 User Manual

Raisecom
iTN2100 (P100R002) Hardware Description
13 EOP cards
Raisecom Technology Co., Ltd.
104
13.7 OPCOM3500E-EOPS-8E1
13.7.1 Appearance and functions
Appearance
Function
The OPCOM3500E-EOPS-8E1 is an EOP-to-EOS card with unbalanced interfaces used by
the iTN2100.
The OPCOM3500E-EOPS-8E1 has identical features.

Provide one DB37 interface by the front panel, supporting 8 E1 channels which are
independent from each other or reversely multiplex.

Reversely-multiplexed Ethernet services can be assigned based on N × VC12 to be
transmitted to the SDH network.

Support framed and unframed modes by the E1 interface. They can be configured through
the software.

Support local and remote loopbacks on E1 links.

Support making statistics on the number of received packets, transmitted packets, error
packets, and traffic.

Support selecting a clock mode: local clock or line clock.

Support optional E1 link BERT.

Support GFP and LAPS Ethernet encapsulation modes.

Support VCAT and Link Capacity Adjust Scheme (LCAS).

Provide complete alarm and performance monitoring.

Support managing any Raisecom RC95x family remote protocol convertor regardless
whether the device is directly connected or connected through a device from other
vendors.

Support hot swapping.
13.7.2 Slots
The OPCOM3500E-EOPS-8E1 can be plugged into slots 1–5 and 8–12 on the iTN2100.

Raisecom iTN2100 Specifications

General

Brand	Raisecom
Model	iTN2100
Category	Network Hardware
Language	English