Raisecom iTN2100 User Manual

Raisecom
iTN2100 (P100R002) Hardware Description
10 Ethernet access cards
Raisecom Technology Co., Ltd.
66
10.4 OPCOM3500E-4FX
10.4.1 Appearance and functions
Appearance
Function
The OPCOM3500E-4FX is a 4-way optical interface Ethernet access card on the
iTN2100.

Provide four ways of 100 Mbit/s Ethernet optical interfaces.

Aggregate Ethernet services received from the front panel to the switching card through
the backplane, and transmit services uplink through the switching card.

Support storm control over broadcast messages, unknown multicast messages, and DLF
messages.

Support interface isolation protection.

Support interface aggregation.

Support QoS and determine four output queues by priority.

Support 802.1Q VLAN and 4K concurrent VLANs.

Support QinQ.

Support 8K MAC addresses and 30 static MAC addresses.

Support enabling or disabling MAC address learning based on interfaces.

Support configurable aging time ranging from 0s to 3825s.

Support interface-based non-linear rate limiting ranging from 62 Kbit/s to 100 Mbit/s.

Support transparently transmitting BPDU, LACP, and 802.1x management frames.

Support NMS for remote transceivers.

Support hot swapping.
10.4.2 Slots
The OPCOM3500E-4FX can be plugged into slots 1–5, 8, and 10–12 on the iTN2100.

Raisecom iTN2100 Specifications

General

Brand	Raisecom
Model	iTN2100
Category	Network Hardware
Language	English