Raisecom iTN2100 User Manual

Raisecom
iTN2100 (P100R002) Hardware Description
21 Cables
Raisecom Technology Co., Ltd.
255
Figure 21-14 E1-CC3 cable
21.8.3 Specifications
Table 7-9 lists specifications of the E1-CC3 cable.
Table 21-11 Specifications of the E1-CC3 cable
Parameter
Description
Name
CBL-E1-CC3/BNCF
Connector
CC3 female connector, BNC female connector
Type
1C+B co-axial cable
21.9 E1-DB37 cables
21.9.1 Introduction
The E1-DB37 cable is used to connect the DB37 male connector of the iTN2100 and other
devices to transmit E1 services.
Table 21-12 lists relations between the E1-DB37 cable and the card on the iTN2100.
Table 21-12 Relations between the E1-DB37 cable and the card on the iTN2100
Card
Cable
OPCOM3500E-EOPS-8E1
OPCOM3500E-16E1
CBL-E1-DB37F (40)/16NC
CBL-E1-DB37F/16BNCF
CBL-E1-DB37F/16BNCM
OPCOM3500E-EOPS-8E1-BL
OPCOM3500E-16E1-BL
CBL-E1-DB37F/8RJ45
21.9.2 CBL-E1-DB37F (40)/16NC
Appearance
Figure 21-15 shows the CBL-E1-DB37F(40)/16NC cable.

Raisecom iTN2100 Specifications

General

Brand	Raisecom
Model	iTN2100
Category	Network Hardware
Language	English