Raisecom iTN2100 User Manual

Raisecom
iTN2100 (P100R002) Hardware Description
13 EOP cards
Raisecom Technology Co., Ltd.
112
13.9.3 Interfaces
Interface types
There are five interfaces on the iTN2100-EOT-GESTM4 panel, as listed in Table 13-42.
Table 13-42 Interfaces on the iTN2100-EOT-GESTM4 panel
Interface
Type
Description
1–4
SFP optical interface
Service uplink interfaces
–
MiniUSB
Debugging interface
Interface parameters
Table 13-43 lists parameters of interfaces 1–4 on the iTN2100-EOT-GESTM4.
Table 13-43 Parameters of interfaces 1–4 on the iTN2100-EOT-GESTM4
Parameter
Description
Connector type
SFP optical interface (LC)
Interface rate
You can configure four STM interfaces on the front panel to STM1 or
the first STM interface to STM4 (other interfaces becomes invalid).
Line code
NRZ
Clock parameters
Comply with ITU-T G.813 recommendations.
Electrical
parameters
Comply with ITU-T G.957 recommendations.
Jitter
Comply with ITU-T G.783 and ITU-T G.825 recommendations.
13.9.4 LEDs
There are eight LEDs on the iTN2100-EOT-GESTM4 panel, as listed in Table 13-44.
Table 13-44 LEDs on the iTN2100-EOT-GESTM4 panel
Interface
Status
Description
PWR
Green
Power LED

Green: the power supply is normal.

Off: the power supply is abnormal.
SYS
Green
System status LED

Green: the system is working improperly.

Off: the system is working improperly.

Blinking green: the system is working properly.

Raisecom iTN2100 Specifications

General

Brand	Raisecom
Model	iTN2100
Category	Network Hardware
Language	English