Raisecom iTN2100 User Manual

Raisecom
iTN2100 (P100R002) Hardware Description
9 Ethernet switching card
Raisecom Technology Co., Ltd.
50
9.1 iTN2100-PTU-4GE
9.1.1 Appearance and functions
Appearance
Function
The iTN2100-PTU-4GE is an Ethernet switching card to implement uplink GE service
switching on the iTN2100.

Support card-level protection and GE interface link aggregation between two cards.

Support master and secondary protection switching between two cards.

Support 24 GE switching capacity.

Support 802.1Q VLAN, Double TAG, ACL, QoS, storm control, rate limiting,
mirroring, link aggregation, layer 2 protocol transparent transmission, loopback
detection, etc.

Support IEEE 802.1ag and ITU-Y.1731.

Support GE ring network.

Support IEEE 802.3ah OAM.

Support layer 2 SLA.

Support Ethernet line protection according to ITU-T G.8031.

Support Ethernet ring network protection according to ITU-T G.8032.

Support statistics, historical configuration statistics, and historical statistics through
RMON.

Support DDM for the SFP module.

Support hot swapping.
9.1.2 Slots
The iTN2100-PTU-4GE can be plugged into slots 9 and 10 on the iTN2100. If you use only
one iTN2100-PTU-4GE, you must plug it into slot 9.

Raisecom iTN2100 Specifications

General

Brand	Raisecom
Model	iTN2100
Category	Network Hardware
Language	English