Raisecom iTN2100 User Manual

Raisecom
iTN2100 (P100R002) Hardware Description
10 Ethernet access cards
Raisecom Technology Co., Ltd.
55
10.1.2 Slots
The iTN2100-16GF can be plugged into slots 1–5, slot 8, and slots 11–12 on the iTN2100.
When one of slots 9–10 is inserted with a switching card, the other slot can be inserted with
the iTN2100-16GF card.
10.1.3 Interfaces
Interface types
There are nine interfaces on the iTN2100-16GF panel, as listed in Table 10-1.
Table 10-1 Interfaces on the iTN2100-16GF panel
Interface
Type
Description
–
MiniUSB
Debugging interface
–
SFP optical
interface
1000 Mbit/s optical interface. Each SFP optical
interface can transmit 2-way of Ethernet optical
signals. The device supports up to 16-way GE services
Interface parameters
Table 10-2 lists parameters of interfaces 1–16 of the iTN2100-16GF.
Table 10-2 Parameters of interfaces 1–16 of the iTN2100-16GF
Parameter
Description
Connector type
SFP (LC/PC)
Line code
8B/10B
Transmission rate
1.25 Gbit/s
Supported optical
modules
100BASE-FX SFP, 1000BASE-X SFP, TSFP-03/DS15-3, and
TSFP-Gb/DS14-3
Supported electrical
interface modules
1000 Mbit/s electrical module USFP-GE-xxR and 10/100/1000
Mbit/s electrical module USFP-GE/AN-xxR
Table 10-3 lists properties of the TSFP module of the iTN2100-16GF.
Table 10-3 Properties of the TSFP module of the iTN2100-16GF
Module
Wavelength
(nm)
Laser
Connec
tor
Tx power
(dBm)
Min.
overload
(dBm)
Extinc
tion
ratio
(dB)
Rx
sensitivit
y (dBm)
Transmi
ssion
distance
(Km)
TSFP-03/DS15-3
1550(FP)
PIN
-10 to -3
-8
8.2
-28
15

Raisecom iTN2100 Specifications

General

Brand	Raisecom
Model	iTN2100
Category	Network Hardware
Language	English