Raisecom iTN2100 - Interfaces; Leds; Table 15-47 OPCOM3500 E-240 GE× 4 L Interfaces; Table 15-48 Parameters of the OPCOM3500 E-240 GE× 4 L Interfaces

Raisecom
iTN2100 (P100R002) Hardware Description
15 PDH and RCMS cards
Raisecom Technology Co., Ltd.
174
15.9.3 Interfaces
Interface types
There are nine interfaces on the OPCOM3500E-240GE×4L panel, as listed in Table 15-47.
Table 15-47 OPCOM3500E-240GE×4L interfaces
Identifier
Interface type
Description
–
MiniUSB
Debugging interface
1–4 (GE)
SFP optical interface
Egress interface for GE service
1–4 (Line)
SFP optical interface
Service downlink interface
Interface parameters
Table 15-48 lists parameters of GE interfaces 1–4 of the OPCOM3500E-240GE×4L.
Table 15-48 Parameters of the OPCOM3500E-240GE×4L interfaces
Parameter
Description
Connector type
SFP optical interface
Interface rate
1000 Mbit/s
15.9.4 LEDs
There are 14 LEDs on the OPCOM3500E-240GE×4L panel, as listed in Table 15-49.
Table 15-49 LEDs on the OPCOM3500E-240GE×4L
LED
Status
Description
PWR
Green
Power LED

Green: the power supply is normal.

Off: the power supply is abnormal.
SYS
Green
System status LED

Green: the system is working improperly.

Off: the system is working improperly.

Blinking green: the system is working properly.
LNK/ACT
(1–4)
Green
Ethernet line LED

Green: Ethernet line interfaces 1/2/3/4 are connected properly.

Off: the Ethernet line interfaces are disconnected or are
improperly connected.

Blinking green: Ethernet line interfaces 1/2/3/4 are receiving or
sending data.