Raisecom iTN2100 User Manual

Raisecom
iTN2100 (P100R002) Hardware Description
17 V.35 card
Raisecom Technology Co., Ltd.
198
17.1.3 Interfaces
Interface types
There are four interfaces on the OPCOM3500E-8V35 panel, as listed in Table 17-1.
Table 17-1 Interfaces on the OPCOM3500E-8V35 panel
Interface
Connector type
Description
–
HDB26 female
connector

Service downlink interface

Each interface can transmit two ways of V.35 data.
17.1.4 LEDs
There are 18 LEDs on the OPCOM3500E-8V35 panel, as listed in Table 17-2.
Table 17-2 LEDs on the OPCOM3500E-8V35 panel
Interface
Status
Description
PWR
Green
Power LED

Green: the power supply is normal.

Off: the power supply is abnormal.
SYS
Green
System status LED

Green: the system is working improperly.

Off: the system is working improperly.

Blinking green: the system is working properly.
TD
(1–8)
Green

Blinking green: V.35 data channel interface 1/2/.../7/8 is sending
data from itself to the DTE device. Blinking frequency indicates
transmission rate.

Off: V.35 data channel interface 1/2/.../7/8 is not sending data.
RD
(1–8)
Green

Blinking green: V.35 data channel interface 1/2/.../7/8 is
receiving data from the DTE device to itself. Blinking frequency
indicates transmission rate.

Off: V.35 data channel interface 1/2/.../7/8 is not receiving data.
17.1.5 Cables
Table 17-3 lists cables of the OPCOM3500E-8V35.
Table 17-3 Cables of the OPCOM3500E-8V35
Card
Cable
OPCOM3500E-8V35

CBL-V35-HDB26M/2M34M

CBL-V35-HDB26M/2M34F

Raisecom iTN2100 Specifications

General

Brand	Raisecom
Model	iTN2100
Category	Network Hardware
Language	English