Raisecom iTN2100 User Manual

Raisecom
iTN2100 (P100R002) Hardware Description
10 Ethernet access cards
Raisecom Technology Co., Ltd.
63
10.3.3 Interface
Interface types
There are five interfaces on the iTN2100-2IGC panel, as listed in Table 10-11.
Table 10-11 Interfaces on the iTN2100-2IGC panel
Interface
Type
Description
–
MiniUSB
Debugging interface
–
(GE1–GE2 electrical
interface)
RJ45
Each interface can transmit a way of 1000
Mbit/s Ethernet service.
–
(GE1–GE2 optical
interface)
SFP optical
interface
Each interface can transmit a way of 1000
Mbit/s Ethernet service.
Interface parameters
Table 10-12 lists parameters of GE1 and GE2 electrical interfaces.
Table 10-12 Parameters of GE1 and GE2 electrical interfaces on the iTN2100-2IGC
Parameter
Description
Connector type
RJ45
Interface rate
10/100/1000 Mbit/s or auto-negotiation
Duplex mode
Full duplex /half duplex/auto-negotiation. It
supports full duplex in non-auto-negotiation mode
and half duplex.
Maximum supported frame length
10 KBytes
Flow control

Full duplex: IEEE 802.3x-based flow control

Half duplex: back-pressure flow control
Line order
Auto MDI/MDIX
Compliance standard
IEEE802.3, IEEE802.3u, and IEEE802.3ab
Table 10-13 lists parameters of GE1 and GE2 optical interfaces.
Table 10-13 Parameters of GE1 and GE2 optical interfaces on the iTN2100-2IGC
Parameter
Description
Connector type
SFP optical interface

Raisecom iTN2100 Specifications

General

Brand	Raisecom
Model	iTN2100
Category	Network Hardware
Language	English