R&S SMA100B - Page 623

Remote control commands
R&S
®
SMA100B
623User Manual 1178.3834.02 ─ 09
[:SOURce<hw>][:ILS]:MBEacon:COMid:PERiod <Period>
Sets the period of the COM/ID signal.
Parameters:
<Period> float
Range: 0 to 120
Increment: 1E-3
*RST: 9
Example: See Example "Configure and generate an ILS marker beacons
signal" on page 596.
Manual operation: See "Period" on page 164
[:SOURce<hw>][:ILS]:MBEacon:COMid:SYMBol
<Symbol>
Sets the length of the Morse code symbol space.
Parameters:
<Symbol> float
Range: 0.05 to 1
Increment: 1E-4
*RST: 0.1
Example: See Example "Configure and generate an ILS marker beacons
signal" on page 596.
Manual operation: See "Symbol Space" on page 165
[:SOURce<hw>][:ILS]:MBEacon:COMid:TSCHema <Tschema>
Sets the time schema of the Morse code for the COM/ID signal.
Parameters:
<Tschema> STD | USER
STD
Activates the standard time schema of the Morse code.
The set dot length determines the dash length, which is 3
times the dot length.
USER
Activates the user-defined time schema of the Morse code.
Dot and dash length, as well as symbol and letter space
can be set separately.
*RST: STD
Example: See Example "Configure and generate an ILS marker beacons
signal" on page 596.
Manual operation: See "Time Schema" on page 164
SOURce subsystem