3.6.2.1 sinema
Description
With this command, you enable the SINEMA configuration interface.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameter assignment:
sinema
Result
The SINEMA configuration interface is enabled.
Further notes
You disable the SINEMA configuration interface with the no sinema command.
You display the setting whether the SINEMA configuration interface is enabled or disabled
with the command show sinema.
3.6.2.2 no sinema
Description
With this command, you disable the SINEMA configuration interface.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameter assignment:
no sinema
Configuration
3.6 SINEMA
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06 121
To Next Page
Loading...
