Further notes
You can display the content of a recording with the show rmon statistics command.
12.4.3.2 no rmon collection stats
Description
With this command, you end the recording of statistical data of an interface.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
no rmon collection stats <index (1-52)>
The parameter has the following meaning:
Parameter Description Range of values / note
index Number of the recording 1 ... 52
Result
The recording of statistical data is ended.
12.4.3.3 rmon collection history
Description
With this command you configure whether or not samples of the statistics are saved for a port.
You can specify how many entries ("Buckets") should be saved and at which intervals samples
should be taken.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Diagnostics
12.4 RMON
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
584 Configuration Manual, 07/2017, C79000-G8976-C361-06
To Next Page
Loading...
