Siemens SCALANCE XR-300WG - Show Snmp Group; Show Snmp Group Access

Syntax
Call the command without parameters:
show snmp filter
Result
The configured SNMP filters are displayed.
7.5.1.5 show snmp group
Description
This command shows the configured SNMP groups.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show snmp group
Result
The configured SNMP groups are displayed.
7.5.1.6 show snmp group access
Description
This command shows the rights of the configured SNMP groups.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Network protocols
7.5 SNMP
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06 325