6.4.2.4 no passive-listening
Description
This command disables "passive listening".
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no passive-listening
Result
The "passive listening" function is disabled.
Further notes
You enable "passive listening" with the passive-listening command.
You display the status of "passive listening" with the show passive-listening command.
Network structures
6.4 Passive Listening
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
268 Configuration Manual, 07/2017, C79000-G8976-C361-06
To Next Page
Loading...
