Siemens SCALANCE XR-300WG - Show Ethernetip; Show Hardware

cli#
Syntax
Call the command without parameters:
show environmental temperature
Result
The temperature values are displayed.
3.1.1.5 show ethernetip
Description
This command shows the current EtherNet/IP configuration.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show ethernetip
Result
The current EtherNet/IP configuration is displayed.
3.1.1.6 show hardware
Description
This command shows the type and number as well as the position of the installed interface
cards of the system.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
Configuration
3.1 System
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
50 Configuration Manual, 07/2017, C79000-G8976-C361-06