Siemens SCALANCE XR-300WG - Show User-Accounts; Change Password

Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show users
Result
The logged-in CLI users are displayed.
11.1.1.3 show user-accounts
Description
This command shows the created users.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
show user-accounts
Result
The created users are shown.
11.1.2 change password
Description
With this command, you change the password of the logged in user.
Security and authentication
11.1 User management
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06 499