Siemens SCALANCE XR-300WG - Page 138

cli(config)#
Syntax
Call the command without parameter assignment:
no panel-button control-hsr-manager
Result
The function of the button for switching over the redundancy manager is disabled.
Further notes
You enable this function with the panel-button control-hsr-manager command.
Functions specific to SCALANCE
4.3 Panel button
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
138 Configuration Manual, 07/2017, C79000-G8976-C361-06