The parameter has the following meaning:
Parameter Description
+ Time zones to the west of the NTP server time zone
- Time zones to the east of the NTP server time zone
hh Number of hours difference
mm Number of minutes difference
Enter the number of hours and number of minutes with two digits each.
Default: No time difference.
Result
The time difference between the device and the NTP server is configured.
System time
5.2 NTP client
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06 153
To Next Page
Loading...
