114
3 Producing with the knitting machine
Eliminating errors in the fabric
Eliminating e rrors in the fabric
3.5 Eliminating errors in the fabric
If the fabric piece is not to be completed properly, two options in the "Machine
start" window can be used.
Keys to interru pt a fabric
Keys to interrupt a fabric
This chapter contains information on:
Starting again after pressing off fabric [115]
Threading up thread into yarn carrier [118]
Removing fabric winding ar
ound fabr
ic take-down [120]
Starting again after pressing off fabric
Key
Function
Call up "Additional function keys"
The cycle currently being knitted is canceled and the
other cycles will be knitted as programmed.
The machine automatically begins with a new fabric if
the following conditions are met:
The racking device is in the home position
The yarn carriers are in starting position
The carriage direction allows beginning again.
As long as these conditions are not met, cyc
les will
o
nly be knitted once.
To Next Page
Loading...