Stoll CMS 520 C+ - CMS 822 - Operating modes and particularities; Operating modes of CMS 822

523
CMS 822 - Operating modes and particularities 10
Operating modes of CMS 822
CMS 822 - Operating modes and particularities
10 CMS 822 - Operating modes
and particularities
This chapter contains information on:
 Operating modes of CMS 822 [523]
 Unusual features in the tandem with comb operating mode [529]
 Installing operating sys
tem for CMS
822 [531]
 Opening and closing the holding-down jacks [532]
Operating modes of CMS 822
10.1 Operating modes of CMS 822
Three operating modes are possible with the CMS 822:
 Four-system machine operating mode [523]
 Tandem machine without com
b operat
ing mode [524]
 Tandem machine with comb operating mode [527]
Four-sys tem machine opera ting mode
10.1.1 Four-system machine operating mode
The needle area covers the entire needle bed width of 84".
Narrow coupling
Narrow coupling
No special items need to be heeded in the knitting program. All four knitting
systems can be used, and a SEN area is to be defined.