168
4 Adjusting knitting machine
Basic settings
Setting c ounters
4.1.14 Setting counters
In addition to the piece counter and the cycle counters, there are also other
counters. On the one hand, they can be used in the knitting program, e.g. to
request conditions. On the other hand, they indicate various machine states.
Buttons for se tting the coun ters
Buttons for setting the counters
Setting counters:
1. Call up the "Cycle counters & counters" wind
ow.
2. Call up "Additional function keys".
3. Tap the key for the desired counter group.
4. Set counter to the
desire
d value.
5. Call up "Main menu".
Key
Function
Call up the "Cycle counters & counters" window
Call up "Additional function keys"
Call up desired counter group
Call up "Main menu"
To Next Page
Loading...