Stoll CMS 520 C+ - Adjusting Yarn Carrier Guide; Adjusting the Brushes of the Central Lubrication

224
4 Adjusting knitting machine
Advanced adjustments
Adjusting yarn carrier guide
4.2.17 Adjusting yarn carrier guide
The yarn carrier guide must be adjusted if the yarn carrier can be lifted from
the yarn carrier rail or a yarn carrier plunger is not put out of action.
Adjusting yarn carrier guide:
1. To check whether the yarn carrier can be lifted from the yarn carrier rail,
tak
e the left and right sides of the yarn carrier housing in both hands and
move the yarn carrier housing upward and downward.
Adjusting y arn carrie r guide
Adjusting yarn carrier guide
2. If necessary push the setting key inwards with the adjusting key from the
accessories till the yarn carrier cannot be raised erect any more.
3. Turn the setting key back by one
-eighth of a turn.
Adjusting the brushes of the centra l lubrication *
4.2.18 Adjusting the brushes of the central lubrication *
The brushes have been adjusted correctly if they touch the working butts
lightly.
Brushes of the central lubrication
Brushes of the central lubrication
Adjusting the brushes of the central lubrication:
1. Release hexagon nut (2).
2. Adjust brushes on hexagon nut (1).
3. Retighten hexagon nut (2).
4. Adjust all brushes.
Further information:
 Symbols in this document [16]