115
Producing with the knitting machine 3
Eliminating errors in the fabric
3.5.1 Starting again after pressing off fabric
Keys for startin g again after pressing off fabr ic
Keys for starting again after pressing off fabric
For machines without a
comb take-down
After pressing off fabric, a problem arises where stitches are pressed off and
therefore further knitting is not possible. To be able to continue, we
recommend calling up the "Picking-up after pressing-off" function. It allows you
to begin knitting even without fabric.
Normally, each knitting program in
cludes the
"Picking-up after pressing-off"
function. With older knitting programs, this function is found from line 950 on;
with the pattern workstation M1, it is activated via "#90".
The machine detects which patter
n wor
kstation was used to generate the
pattern. A knitting program of M1 contains the ID "<M1>" on line 1. Likewise,
program point "P.aft. press-off" in the "Machine start" window is adapted
automatically.
"Picking-up after pressing-
o
ff" function
with older
knitting programs (e.g.
SIRIX)
1. If threads are broken, thread them up again.
2. Call up "Machine start" window.
3. Call up the "Picking-up after p
ress
ing-off" function. Tap the "P.aft. press-
off from line" key for this purpose.
Machine start window
"Machine start" window
4. Start the machine with the engaging rod.
Key
Function
Call up "Machine start" window
Confirm entries
To Next Page
Loading...